Orc 37

Sejlbåd Orc 37, årgang 2015. er annonceret til salg af Ropest OÜ. For yderligere information om Orc 37 som til eksempel en udførlig bådbeskrivelse, båddata, komplet bådudstyrsliste eller flere fotos - kontakt venligst sælger Ropest OÜ via Send E-mail. Du kan også benytte det direkte link ovenfor, Sælgers webside, der henviser til en detaljeret bådannonce hos Ropest OÜ eller Ropest OÜ egen webside med mulighed for at finde yderligere præsentation af båden. Bemærk, der kan være en mere detaljeret bådbeskrivelse af Orc 37 på scanboat på tysk, engelsk, svensk eller hollandsk, dem finder du via de viste flag, ovenfor denne tekst. For at se annoncer der matcher Orc 37 skal du klikke på Lignende Sejlbåd oppe i højre hjørne af denne annonce. Vil du se sælgers øvrige annoncer for Sejlbåd på scanboat.com - vælges det via knappen, Sælgers annoncer. Hold dig opdateret, opret en annonceagent: Så får du automatisk besked med ændringer af den annoncerede Orc 37 eller en besked når der kommer nye Orc 37. Annonceagent oprettes på søgesiden ved vælge Gem Søgning. Samme mulighed for at oprette en annonceagent får du når du via Send E-mail skriver til Ropest OÜ. Er du på udkig efter bådtest og videoer: Tjek Youtube ved at søge efter Orc 37.

FASTEST BOAT FOR ORC CLASS-C FOR THE NEWPORT ORC WORLDS or EUROPEANS. New CDL under 9,600m. 2018 ORC European Champion Boat is launched in the august of 2015, is a one-off racing boat developed for the ORC races and for international crew who has been won 10 medals from ORC Worlds and Europeans. In 2017 boat where updated and hull was replaced according to the ORC VPP change. Boat has been not sailed since 2019 (after the covid) and storage indoor since that. Boat comes with Maurizio Cossutti design studio optimization for 2024 season. New Garmin electronics from 2024 Sails • Main 2015 3Di • Main 2018 3Di • Jib X-light 2015 3DL • Jib X-Light 2018 3Di • Jib Light 2015 3Di • Jib Light 2018 3Di • Jib Light 2019 3Di • Jib Medium 2015 3Di • Jib Medium 2018 3Di • Jib Heavy 2015 3Di • Jib-Top 2015 3Di • S-1 2015 • S-1,5 2015 • S2 2015 • S4 2015 • S5 2015 • S-1 2018 • S-1,5 2018 • S2 2018 • A1,5 2019 Rigging • Carbon Hall spar mast, boomerang carbon spreaders, carbon boom. • Rod rigging, PBO headstay (spear rod headstay) • Schaefer marine aero tuff-luff. • Cariboni hydraulic headstay cylinder. • Dual backstay system ( single backstay from crane and double backstay from mast for squaretop main) • Carbon spinnaker pole from Hall Spar and spear aluminum spinnaker pole from Selden About the desing: Deck of the Katariina II has been designed to be as more ergonomic as possible: in fact, it has a large cockpit with a tiller (or forward big steering wheel) and a low profile coach roof to move easily on deck and to be more aerodynamic. The interiors were carefully studied to be the minimum required by the regulation and they have been designed, in accordance with the owner, to be ergonomic and comfortable for the offshore races. Structurally speaking the boat is design to have the right stiffness to withstand the natural loads. The hull has been laminated with an optimized lay-up made of infused unidirectional layers. Different types of core have been used on the different areas of hull and deck to assure the proper balance between weight and stiffness, for example in the forward area, where there are high slamming loads, a high density core has been used in combination with single skin laminate. All the interiors are structural to combine furniture with the structure and save weight: the interiors located at the extremities are made with composite material and the ones in the central part of the boat with marine plywood to obtain a better weight distribution. The central structure of the boat is made by a stainless steel frame which is designed to take the high loads deriving from the mast, shrouds and keel and transfer them smoothly to the hull. This frame is connected mechanically to the bulkheads and the surrounding structure and it is also over laminated and tabbed to the hull. The remaining structure of the boat are made by longitudinal and transversal stiffeners containing carbon unidirectional bers and laminated directly to the hull. All the bulkheads are made with composite material and they are bonded and tabbed to both hull and deck, which make hull extremely stiff. The appendages have been designed for the best hydrodynamic efficiency and they have been optimized with the best CFD techniques. The keel is assembled with stainless steel structural frame, covered with GRP. Lead bulb and it is milled out to have the proper designed shape. The sailing plan has been developed in collaboration with the North Sails designers and optimized with the CFD techniques.

Säljaren av Orc 37 årsmodell 2015, är Ropest OÜ. För ytterligare information om Segelbåt Orc 37 som exempel detaljerad båtbeskrivning, komplett båtutrustning eller fler bilder - kontakt säljaren, Ropest OÜ via Skicka e-post eller använd direktlänken ovanför till den detaljerade annons hos Ropest OÜ eller säljarens egen hemsida. Ropest OÜ kan ha en mer detaljerad beskrivning av Orc 37 på tyska, engelska, danska eller nederländska. Språken väljas till höger om knappen Annoncera. Vill du se säljarens andra Segelbåt annonser på scanboat.com - välj det via knappen, Säljares annonser.

Orc 37, Bouwjaar 2015 is te koop aangeboden, door Ropest OÜ. Voor meer informatie over Orc 37 zoals een gedetailleerde bootbeschrijving, complete lijst met bootuitrusting of meer fotos - neem contact op met verkoper Ropest OÜ via Verzend e-mail of gebruik de directe link hierboven, de website van de verkoper - verwijzend ernaar gedetailleerde advertentie op Ropest OÜ of de eigen website van de verkoper. Let op, Ropest OÜ heeft mogelijk een meer gedetailleerde beschrijving van Orc 37 in het Duits, Engels, Zweeds of Deens. De talen worden rechts van de knop Advertentie maken geselecteerd. Als u advertenties voor soortgelijke boten wilt zien, zoals Orc 37, klikt u op Vergelijkbare Zeilboten in de rechterbovenhoek van de advertentie. Wilt u de andere Zeilboten advertenties van de verkoper op scanboat.com zien - selecteer het via de knop Verkopers boten.

Orc 37, Baujahr 2015 wird von Ropest OÜ verkauft. Für weitere Informationen, z.B. detaillierte Beschreibung, Bootsausrüstung, oder Fotos von Segelboot Orc 37 - kontaktieren Sie bitte Ropest OÜ via E-Mail senden oder benutzen Sie den direkten Link oben, Händlerwebsite - auf den Sie die detaillierte Anzeige von Ropest OÜ sehen können. Um Anzeigen für ähnliche Boote wie die Orc 37 zu sehen, klicken Sie in der rechten oberen Ecke der Anzeige, auf Ähnliche Segelboot. Bitte merke, Ropest OÜ könnte eine detailliertere Beschreibung von Orc 37 auf Englisch, Schwedisch, Dänisch oder Niederländisch haben. Die Sprachen werden oben rechts neben "Anzeige aufgeben" gewählt. Wenn Sie die anderen Segelboot Anzeigen von der Verkäufers auf scanboat.com sehen möchten, wählen Sie dies via, Anzeigen vom Verkäufer.