. Breehorn 37 General Displacement: 7800 Ballast: 3250 Vertical clearance: 16.40 metres CE-category: A, ocean Other: The entire interior panelling is made of high quality matt lacquered teak. Screws are processed blind as much as possible. The ceiling consists of white plastic plate finished with teak battens. Kitchen and toilet consist of a polyester bowl finished with wood. Handles at the entrance and above kitchen and card table. The wood grain of the cabinet doors runs as far as possible. Doors equipped with hinges, outriggers, etc. and fingernappers. Hull and deck: Hull and deck are made of fiberglass reinforced polyester. The gelcoat and first two layers of polyester are of ISO N.P.G. quality. The hull is constructed above the waterline sandwich with PVC foam of 20 mm thickness. This also applies to the deck. Kiel: The keel is formed by a polyester shell filled with 3250 kg of lead. The keel is fastened with stainless steel bolts welded to a stainless steel frame in the keel. The keel is laminated to the hull with a double layer of polyester. Rudder: The rudder is around the aluminium rudder stock with three pairs of welded springs laminated and filled with foam. The rudder stock has three bearings and is protected by a full length skeg. Standard is a wooden layered and curved tiller with stainless steel fittings. Living: The living room can be equipped with longitudinal benches on both sides or with a U-bench on port side. With the U-bench paneling, the kitchen partition ± 15 cm to the back moved so that more space in the living room comes into being. The two benches are 2 meters long and 60 cm wide. Table can be folded down on two sides. Rear cabin: The bed is 2.00 meters long by 1.60 meters wide at the headboard. At the entrance a small wardrobe. Front double bed 2 meters long by 1.90 meters wide at the headboard. Hanging closet on starboard, closet with wire baskets on port side. Cushions and curtains: High quality cold foam custom made by ship.
Materiale / unit
Motor & technic