Our server will be updated in 5 min., sorry for the bump and inconvenience.

Tillbaka Liknande Segelbåt

McConaghy MC31

  • Årsmodell 2017, Segelbåt till salu
  • Goteborg, Sverige

703 530 SEK

(65 000 EUR)
McConaghy MC31 Segelbåt 2017, med Tohatsu motor, Sverige
Skicka e-post

Säljare:

Jonas Winzell

  • Linnegatan 40, 41308 Goteborg, Sverige
  • Tel. +46702603620

Beskrivning

  • SV
  • EN
  • DA
  • NL
  • DE

The MC31 is a no compromise high performance sail racer. Through careful analysis of equipment, construction materials and processes, McConaghy Boats have been able to realise the best performance outcome per money spent. The MC31 will outperform much bigger and more expensive boats. With no rating rule constraints McConaghy have designed a clean hull with good form stability due to its deep keel and high ballast ratio. This all aids in the philosophy of bringing an exciting raceboat with the opportunity to participate in anything from local races to ocean racing on the open sea. The carbon fibre rig and rigging is standard from Southern Spars as are the carbon fibre elliptical stanchions. The two-spreader mast is in two sections for easy stowage and towing and comes with a standard mast jack for easy rig tuning. Certainly it is a great boat that would suit a sporty sailor who is serious about sailing and also both wants to go out and day sail with friends. and who is serious about racing. It is easy to rig, easy to sail and a lot of fun while forgiving for any mistakes made. You could take non-sailing friends out without them getting in the way while having the ride of their life. The boat's previous owner participated in the HP30 Class in southern England for a few seasons. For this, some changes were made to better measure up to the IRC rule. Equipment was removed from the boat, including the engine and the diesel tank. The keel was shortened by 20 cm to a draft of 240 cm. Overall, the boat became 250-300 kg lighter than in its original condition. Boat no 7, built in 2017 by McConaghy Boats, China/Australia. designer Harry Dunning, Dunning & Associates Yacht Design. The boat has been measured in IRC, ORC and Swedish SRS. The boat also comes with a trailer for transport. The boat can be towed by a pick-up or light truck with a trailer weight of up to 3500 kg. The keel can be lifted up to facilitate handling and transport on the trailer. Dimensions LOA: 9.15m Beam: 3.05m Draft: 2.40 m Displacement: 1900kg Keel Weight: 640 kg Sails Main: 37.6 m2 Jib: 25.9 m2 Gennaker: 122,9 m² Sail wardrobe and other equipment MAINS - North Sails 3Di Main 2017 (very good condition) Main 2019 IRC (ok) Trysail 2017 (very good) JIBS/GENOAS - North Sails 3Di JIB L/M 2017 (ok) JIB M/H 2017 (ok) JIB HW (good) Jib HW+ 2020 (very good) ASYMETRIC SPINNAKERS – North Sails A2 2017 (good) A3 2017 (good) A2-2 2019 (ok) Code 1 2017 (very good) NAVIGATION B&G H5000-system CPU Hercules Precision 9 Compass H5000 Race display x2 NAIS 400 AIS NSPL 400 Vulcan plotter 7’ OTHER Lithium batteries 12v, 90 Ah + 50 Ah extra Holmatro hydraulic pump/mast jack Mooring rope Fenders Anchor Toilet (mobile) Gas burner (mobile) Trailer Böckmann TPV BA3500R (German built, load up to 2850 kg) Cradle for storage on land, not assembled Melges, Far East, J-Boats

Specifikationer Utrustning

Materiale / längd, bredd etc.

Skrov

Glasfiber

Längd

9,15

Bredd

3,05

Vikt

1900

Djup

2,40

Motor & teknik

Motor

Tohatsu

Motor, årsmodell

2018

Motor, nummer

1

Motorplacering

Utombordare

Drivmedel

Bensin

Drivaxel

Utenbordsmotor

Kylsystem

Saltvatten

Allmänna

Köl och skrov

Motor

Kabin

Mast och segel