Corvette Classique 500 Turbo Motorbåt 1991, med Thorneycroft motor, England

Fler bilder

1 131 150 SEK

(85 000 GBP)

Nicolle Associates
Adrian Nicolle
S031 4NB Hamble
England
+44 23 8115 7013
+44 77 6883 4664

Quick Contact, logga in Skicka e-post

Säljarens hemsida Säljarens båtar

Beskrivning

Säljaren av Corvette Classique 500 Turbo årsmodell 1991, är Nicolle Associates. För ytterligare information om Motorbåt Corvette Classique 500 Turbo som exempel detaljerad båtbeskrivning, komplett båtutrustning eller fler bilder - kontakt säljaren, Nicolle Associates via Skicka e-post eller använd direktlänken ovanför till den detaljerade annons hos Nicolle Associates eller säljarens egen hemsida. Nicolle Associates kan ha en mer detaljerad beskrivning av Corvette Classique 500 Turbo på tyska, engelska, danska eller nederländska. Språken väljas till höger om knappen Annoncera. Vill du se säljarens andra Motorbåt annonser på scanboat.com - välj det via knappen, Säljares annonser.

Extensive refit Based on the Corvette 32, the improved Corvette Classique 500 Turbo is a truly unique, spacious and fast 10m semi-displacement Flybridge Trawler Yacht that is stable at both high and low speeds and offers an unrivalled amount of exterior accommodation and deck space for her size. Fitted with the larger engine options her twin 250hp Thorneycroft Hino marinised Toyota Six Cylinder shaft diesels push her along comfortably up to 20 Knots. This model also benefits from a bow thruster for ease of handling and single-handed sailing. Her interior is both light and bright with many opening windows. Accommodation comprises an en-suite aft double with access from both sides of the bed and a twin forward en-suite.An extensive twelve-month refit was completed in Spring 2024 including items covered by a survey report from the time of the current owner's purchase.Extensive works included: Rudders Both rudders removed and shot blasted Rudder stocks cleaned and polished Glands cleaned out and repacked with new PTFE enhanced Drive Force PTFE Flax Sturntite Gland Packing - 10mm. Rudder oil greaser system removed and cleaned before loading with new marine grease Propellers Both propellers removed and restored to new condition by Hamble Propellers. Refitted with new retaining nuts and lock washers New Gudgeon pins Propeller shafts Shafts removed and polished. Rope cutters removed and cleaned Both Cutlass bearings removed and replaced Shaft couplings removed and cleaned PSS deep ware seals removed and cleaned New bellows fitted to port and starboard shafts plus new rings and grub screws (Starboard bellows was trapped by engine exhaust pipe causing it to leak badly under load, this fault was rectified) New sea water injection pipes to PSS seals fitted to port and starboard and new interconnecting pipe fitted for single engine running New lock nuts fitted to both couplingsExhausts Exhaust outlets released from hull and refitted with new stainless bolts, washers, mastic and nuts Earth Bonding Old damaged wiring was stripped out and new bonding fitted This includes rudder assemblies, P brackets and engines Large hull mounted anodes (2) replaced and cross coupled New anodes (4) fitted to trim tabs New anodes (2) fitted to shafts Engine stop solenoid New starboard engine stop solenoid fitted and connected to existing wiring Fuel System Primary "Racor" filters removed and cleaned — new filter elements fitted New engine fuel filters fitted Sanitary System Both forwards and aft toilets removed and replaced with Jabsco auto flush electric units. New Sea smart sanitation odour control units fitted to both toilets (Fluid replaced April 2024) All sanitary hoses and Jubilee clips inspected and replaced as needed. New thermostatic shower fitted to aft heads with electric auto pump out New heated towel rail and new fluorescent lights New mixer tap fitted to basin New mirrors Skin Fittings and Sea Cocks All inspected Redundant outlet inlet skin fitting, sea cock and blanking plug replaced with DZR new All jubilee clips replaced as necessary Forward heads Raw water inlet skin fitting, sea cock, elbow and hose tail replace with DZR New sink and mixer tap plus new fluorescent lights New heater fitted New mirror New sink and tap Water System New fresh water pump and hoses Original galvanised fresh water tank connected Windscreen Wipers All three sets replaced with new motors, pantograph arms and wiper blades. New control and synchronisation module fitted with new switch Marine Radio New VHF radio with DSC and AIS fitted and tested. Linked to Raymarine display to show AIS targets Galley Complete new galley fitted with new hob, fridge and microwave. All gas fittings removed from the boat now 100% electric domestics. Electric heated towel rail fitted New fluorescent strip lighting fitted Anchor Chain replaced with 20 meters of new chain plus 20 meters of new suitable anchor warp. Anchor motor serviced and fully operational Anchor safety lock link fitted New anchor snubber Bow Thruster Found to be working OK after locating isolation switch Internal All new upholstery, carpets, blinds, mattresses and head linings All new foam insulated linings to cabin sides Electrical Galvanic isolator fitted New mains power inlet fitted to port side Distribution panel replaced for DC and AC side plus new circuit breakers for AC loads Multiple new power points fitted to all 3 cabins New downlights fitted to saloon New strip lighting fitted to forward and aft cabins New strip lighting fitted to forward and stern heads Compass New steering compass fitted at helm station Mooring All fenders and warps replaced New dockside boarding steps Engine Access New hatches created in saloon floor to allow easy access to engines and batteries General improvements New canvas dodgers for aft deck Full set of white cushions for all deck seating New masthead TV aerialPlenty of fenders and warps (many new)May 2024 service Engine oil and filter change May 2024 Full hull and superstructure cut and polish May 2024 New antifoul May 2024 All new anodes (hull x 2, Trim tabs x 4, Shafts x 2) May 2024 Owners commentsThis boat is in very good condition and offers “Tardis” like accommodation for her size. With almost all work complete she offers her new owner the prospect of many happy hours of trouble-free boating. I purchased the boat in December 2021 following a full survey including lift out and hull inspection. Regrettably illness and hospital treatment prevented further works until late in 2022 when a full refit was undertaken in accordance with the survey report from the time of purchase. Following 12 months extensive work by the spring of 2024 the refit was largely completed. Brokers CommentsUK VAT paid and Part 1 registered for secure transfer of TitleThere is a comprehensive documentation pack including all bills of sale and engine workshop manual