Our server will be updated in 5 min., sorry for the bump and inconvenience.

Back to search Similar Sailingboat

Beneteau Oceanis 311 Clipper

  • Build year 2003, Sailingboat for sale
  • Nieuwkoop, Jachthaven Aart Leli...

49,900 EUR

Beneteau Oceanis 311 Clipper Sailingboat 2003, The Netherlands
Send email

eSailing

  • Soerelseweg 22a, NL 8162 PB Epe, The Netherlands
  • Tel. +31 88 250 2500

Description

  • EN
  • DA
  • SV
  • NL
  • DE

This Beneteau Oceanis 311 impresses not only with its beautifully lined design and good sailing performance, but also with its comfort, space, and functionality. Whether you are an experienced sailor or a beginner, the Oceanis 311 is an excellent choice. Inside, you can enjoy a spacious and bright salon, two cabins, and a separate wet room with toilet and shower. To enhance comfort, it is equipped with recently installed Autoterm hot air heating, refrigerator, oven, and water heater. The yacht is stored in a covered shed during winters and is in excellent maintenance condition. The engine receives annual servicing, and significant investments have been made in recent years to keep the vessel in optimal condition. VAT has been demonstrably paid. Renovations: 2020 - winter cover 2020 - rigging renewed 2020 - service battery 2020 - cockpit table 2020 - Raymarine ST70 displays, depth and speed transducer, wind transducer 2020 - new halyards 2020 - diesel tank cleaned 2021 - VHF antenna + cable renewed from masthead to chart table 2021 - engine heat exchanger overhauled 2021 - cabin windows and plexiglass in hatches renewed 2021 - Fusion radio 2021 - Delta anchor 2022 - hull coated with 5 layers of epoxy and new antifouling 2022 - jib cleaned 2022 - maindrop system for mainsail renewed 2023 - manual anchor windlass installed 2023 - stainless steel bow anchor fitting 2023 - renewed folding windows 2023 - midship cleats installed 2023 - Planar diesel heater installed 2024 - mast halyard guide adjusted for genoa 2024 - sail maintenance 2024 - rubber and cap of cockpit bilge pump renewed General: Vessel name: Klovers, brand and type: Beneteau Oceanis 311 Clipper, length 9.85 m, beam 3.23 m, draft 1.45 m, year of construction 2003, hull number FR-BEY83990C303, builder Beneteau France, designer Group Finot, round bilge, fin keel, polyester, displacement 3,500 kg, ballast 1,100 kg, tiller steering, Delta anchor with manual windlass, anchor chain and line, integrated swim platform, stainless steel swim ladder, perspex windows, cherry wood interior, 6 berths, 2 cabins, headroom in salon 1.84 m, forward berth length 2.05 m, settee berth length 1.93 m, aft berth length 1.90 m. Engine: Engine type Volvo Penta MD2020, 18 hp, serial number 5102335460, year of construction 2003, diesel, shaft drive, indirect cooling, 3-blade fixed propeller, fuel tank 75 liters, tachometer, hour meter approx. 975 hours, oil pressure and temperature warning. Rigging: Air draft approximately 15 m, masthead rigged, mainsail with lazy jacks and drop bag, roller furling genoa with UV strip, furling system, stainless steel rigging, sprayhood, 3 Lewmar ST30 winches. Navigation and equipment: Starting battery, service battery 160 Ah, 12 Volt system, shore power connection, Dolphin battery charger, Contest Plastimo compass, 2 Raymarine ST70 displays for depth, log, and wind, GPS Furuno GP-1650W (non-functional), Cobra handheld VHF, fixed VHF antenna and cable, Fusion MS-RA70N radio, navigation lights. Gas and water: Water tank 290 liters, electric water pressure system, boiler (220V + engine), hot and cold running water, Jabsco marine toilet, refrigerator, 2-burner gas stove, oven, gas locker, Planar Autotherm diesel hot air heating. Disclaimer: Information is provided to the best of our knowledge, however, yacht brokerage eSailing is not liable for the quality and/or description of the vessel.

Specifications

Materiale / unit

Hull type

Fibreglass

Length

9.85

Beam

3.23

Depth

1.45

Motor & technic

Engine

Fuel

Unknown