Our server will be updated in 5 min., sorry for the bump and inconvenience.

Back to search Similar Motorboat

Motorboat 1050

Classic steel motorboat for recreational sailing

  • Build year 1980, Motorboat for sale
  • The Netherlands

2,500 EUR

Motorboat 1050 Motorboat 1980, with Mercedes engine, The Netherlands
Send email

Boatauction.com

  • Rubberstraat 9, 1411 AL Naarden, The Netherlands
  • Tel. +31 35-5449675

Description

  • EN
  • DA
  • SV
  • NL
  • DE

Motorboat 1050 now in the online auction. Everyone can bid until November 24, 2025. Motorboat 1050 – Steel motorboat from 1980 with functional equipment General characteristics and dimensions The Motorboat 1050 is a steel motorboat with a length of 10.50 meters and a width of 2.98 meters. The draft is 0.95 meters, making the boat suitable for various inland waters, lakes, ponds, and rivers. With a headroom of 2.60 meters, it can pass under most bridges. Inside, there is a standing height of 2.00 meters, providing comfortable movement in the interior. This motorboat was built in 1980 at the Wieringen shipyard in Germany and was purchased in Heeg in 2002. The hull is of a hard chine design, contributing to stability and handling. Steering is done via a wheel and is dual, allowing for both interior and exterior steering. The rudder is single. Motorboat 1050 now in the online auction. Everyone can bid until November 24, 2025. Interior and accommodation The accommodation of the Motorboat 1050 is set up for both short and longer stays on board. It has two fixed berths, with the possibility of three additional berths. The interior includes a dining area, mattresses, a refrigerator, and a stove. The kitchen is not fully finished, and the 100-liter water tank is currently not connected. The onboard toilet is electric and discharges directly into open water. Heating is not present, which may be relevant for use in colder seasons. The boat is suitable for various purposes such as day trips, leisure cruising, vacations, weekend stays, and even temporary living space. Engine and technical installation The boat is equipped with a Mercedes 2.22 inboard diesel engine with 58 hp, distributed over four cylinders. The engine is electrically started and operational. The cruising speed is around 9 km/h, with a maximum speed of about 12 km/h. The engine is from the same year as the boat, 1980. The fuel tank has a capacity of 200 liters. In terms of gauges, an oil pressure gauge and temperature gauge are present. The tachometer is currently non-functional. The electrical system includes a dynamo, inverter, voltmeter, shore power connection, and a solar panel. There are two onboard batteries with a total capacity of 360 Ah. The electrical systems operate on 12V and 220V. Equipment and deck gear On deck, the Motorboat 1050 is equipped with various items contributing to comfort and functionality. It has a bimini for shade on sunny days, davits for hanging a dinghy, pulpit, and pushpit seats for deck seating. Additionally, fenders and lines are available for mooring, along with a swim platform and ladder for easy water access. The boat has one anchor attached with a line. It weighs approximately 8,500 kilograms, enhancing stability while sailing. Maintenance and condition The Motorboat 1050 was last taken out of the water for maintenance in 2024. In the same year, antifouling treatment was performed. There are some known issues, including an unfinished kitchen, a disconnected water tank, and some minor technical or cosmetic points. The boat is not registered, but VAT has been paid. The current owner has mainly used the boat for recreational purposes, including day trips, vacations, and weekends away. The boat has also served as temporary living space. User experience and history The Motorboat 1050 has a history dating back to the 80s, used on various inland waters. The current owner has had the boat since 2002 and has sailed with acquaintances in the 90s. Built in Germany, the boat has been in service on lakes, ponds, and rivers. Conclusion The Motorboat 1050 offers a functional base for those seeking a steel motorboat with ample space and equipment for recreational use. With a classic build and practical layout, this boat is suitable for diverse boating experiences on inland waters. The available amenities and technical installations allow for comfortable stays on board, with room for further finishing and personalization.

Specifications Equipment

Materiale / unit

Hull type

Steel

Length

10.50

Beam

2.98

Deplacement

8500

Depth

0.95

Motor & technic

Engine

Mercedes

Total power

58

Engine place

Inboard

Fuel

Diesel