Our server will be updated in 5 min., sorry for the bump and inconvenience.

Back to search Similar Sailingboat

Biga 26.1 Classic

Dinette version, retractable centerboard

  • Build year 1982, Sailingboat for sale
  • Im Jaich Lauterbach auf Rügen, ...

19,500 EUR

Biga 26.1 Classic Sailingboat 1982, with Vetus engine, Germany
Send email

Seller:

Yachtbroker Baltic

  • Am Yachthafen 1, 18119 Rostock, Germany
  • Tel. +49 (0) 175 696 7077

Description

  • EN
  • DA
  • SV
  • NL
  • DE

For sale is a lovingly maintained Biga 26.1 Classic. It can be viewed in Lauterbach on Rügen. Here is the owner's description: Biga 26.1 Classic 1982 - well maintained and top equipped Dinette version, retractable centerboard Description Continuous refit from 2011 - 2022 Viewings in the water until August 20th and September 5th-8th, 2025 possible; Winter outdoor storage paid for 25/26. We are upgrading. Have often used the boat as a cozy holiday apartment right on the water. The boat is ready to sail. Minor repairs are always necessary. Hook up, launch, and have fun. :-) Length 7.90 m plus bowsprit 8.30 m, width 2.50 m, draft 0.85/1.40 m Special features of this boat type: Two hull windows and a bow window for a wonderfully bright bow cabin; we removed the wardrobe in the bow to create more space. Now there is a Brunner Polarys Freez SZ refrigerator 30 L 220v/12V installed. We removed the three-way toilet for environmental reasons (could be reinstalled) and live very well and odor-free with a bio-separating toilet. The berth width (100 cm) in the dinette can be widened to 120 cm by lowering the table, leaving space to stand in front of the galley. A more spacious sleeping area for two was created. High-quality Echtermann trailer TÜV will be renewed, included in the price. The boat weighs 3.5 tons due to its top equipment (three-burner stove, hot water boiler with outdoor shower, heating, 15 HP Vetus engine, electric anchor winch, and mast lowering system with stainless steel bowsprit), including the trailer. VETUS M2.13 engine with two-circuit cooling and Lake Constance approval, no license required as it is 15 HP (adequately sized) with only about 75 operating hours! Refit pictures from 2019-21, berth, sail, and interior pictures from 2020. The ship is specifically equipped for good sailing characteristics, while continuously improving living comfort. 2025: Two new Bosch 95 A batteries, new sprayhood seams 2024: Removal of defective refrigerator; Brunner Polarys Freez SZ refrigerator 30 L 220v/12V in the bow + portable and retractable 12V/220V cooler in place of the old inefficient compressor cool box 2023: Removal of old toilet, bio-separating toilet; Widening access to bow cabin by removing wardrobe. 2022: Additional steps on stairs in salon and mahogany shelves for spices in galley and small items installed. Alternative larger cockpit table. The original is very well preserved. 2021: Prepared bowsprit with custom-made bowsprit, raised pivot point of cap shrouds (shortened accordingly) and mast attachment with roller on stern pulpit All windows in the cabin area new with an integrated opening porthole to starboard above the galley Repainting of cabin structure and sheer strake Centerboard lift including block refurbished New antifouling Outboard motor mount made of solid wood 2020: New teak step in bow pulpit 2 new teak seats - removable - for the stern pulpit for increased seating position New solar ventilator 30 m V4A stainless steel chain 6 mm for anchor winch 2017-2019: Teak deck completely overhauled. All deck fittings were removed, sealed, and reinstalled. Anchor locker (weakness of the Bigas) completely rebuilt by the boat carpenter. All solid wood parts of the deck structure painted at least four times. Underwater hull completely sanded with primer and antifouling rebuilt. Boat outlet and valve in the toilet area renewed. New propeller plus a maintenance-free shaft The shaft coupling had been replaced a year earlier (1200.00 euros). Throttle, cables from 2013. New AGM consumption battery 105 AH 2015 - 2020 Complete running gear including Cunningham, mainsail drop system, lazy bag 2015: LEWMAR V 700 electric anchor winch with remote control and 7.5 Kg. M-anchor Shrouds, stays, and backstay tensioner Gennaker with snuffer used only a few times so far Clipper Wind Diesel heater Lifesling aft 2014: BARTON boom vang (boom topping lift - cut of the mainsail optimal) Full-battened mainsail "de Fries", Ruttgerson ball-bearing mast sliders, 2 rows of reefs Self-tailing 18 ST winches by ANDERSSON 2013: Genoa by "de Fries" with foam luff Pro Furl C 290 furling system Complete new mahogany interior finish Hot water boiler with pressurized water system 2 new water tanks (70 and 120l) fore and amidships for optimal trim Additional ballast weight of approximately 100 kg to stiffen the centerboard Complete conversion to LED lighting Genoa sheeting points adjustable from the cockpit New genoa covers 2012 Complete new electrical wiring Sprayhood with short aft cover DSC VHF radio Clipper: Depth sounder, log C-map chart plotter Stainless steel bowsprit for gennaker and anchor roller 2011 Full boat covers Enclosure for cockpit 2010 Galley 3-burner gas oven, piezo ignition Lockers by boatbuilder with acrylic glass and LED lighting with integrated compressor cooler box Jabsco pump toilet, 3-way valve (hose renewal 2020) (removed in 2022), 15 l waste water tank Upholstery including foam and covers new - flawless Automatic panel, shore power unit FI/10 AH automatic, 220V/12V/USB sockets Spring cleats Teak step ladder LED navigation lights including anchor light Electric bilge pump automatic; manual bilge pump aft Radar reflector Gas detector

Specifications Equipment

Materiale / unit

Hull type

Fibreglass

Length

8.20

Beam

2.50

Deplacement

1800

Depth

1.40

Motor & technic

Engine

Vetus

Total power

15

Engine count

1

Engine place

Inboard

Engine hours

75

Fuel

Diesel