Our server will be updated in 5 min., sorry for the bump and inconvenience.

Back to search Similar Sailingboat

Wauquiez Victorian 27

New Shrouds, Foresail, And Navigation Technology

  • Build year 1967, Sailingboat for sale
  • Rostock Hohe Düne, Germany

9,900 EUR

Wauquiez Victorian 27 Sailingboat 1967, with Vetus engine, Germany
Send email

Seller:

Yachtbroker Baltic

  • Am Yachthafen 1, 18119 Rostock, Germany
  • Tel. +49 (0) 175 696 7077

Description

  • EN
  • DA
  • SV
  • NL
  • DE

Wauquiez Victorian 27 "Louise-Henriette" – Classic with Extensive Refit 2023–2026 For sale is a Victorian 27 from the renowned French shipyard Henri Wauquiez, designed by Kim Holman. The Victorian 27 is among the early fiberglass classics from the yard and was built in a limited series of only about 52 units. The construction combines classic lines with an exceptionally solid build for its size. With a high ballast ratio, moderate draft, and masthead rig, the Victorian 27 is a characterful and manageable cruising yacht. What sets the offered "Louise-Henriette" apart is her extensive refit: Over the past years, the vessel has not only been maintained but has undergone significant technical and aesthetic upgrades. Numerous works are documented with invoices from professional service providers dated between 2023 and 2026. Technical Data Shipyard: Henri Wauquiez, France Designer: Kim Holman Model: Victorian 27 Construction: Fiberglass Rig: Masthead Sloop Keel: Fin Keel Length Overall: approx. 8.36 m Waterline Length: approx. 5.90 m Beam: approx. 2.61 m Draft: approx. 1.24 m Displacement: approx. 2,268 kg Ballast: approx. 1,102 kg Headroom: approx. 1.76 m The Victorian 27 was built from 1966 to 1968 in a series of only about 52 units. Sail Areas According to Original Data Mainsail: approx. 10.3 m² Jib: approx. 14.0 m² Spinnaker: approx. 46.0 m² The standard sail area for mainsail and jib combined is approximately 24.3 m². ________________________________________ Refit & Investments 2023–2026 2026 – Standing Rigging Completely Renewed One of the most important points for a buyer: The standing rigging was professionally renewed in June 2026. Renewed or serviced were among others: • Upper shrouds • Lower shrouds • Backstay • Components of the forestay • New stainless steel rigging wires • New Blue-Wave terminals • New rigging tensioners • New cotter pins and safety elements • Complete rigging and rig work This comprehensive overhaul addressed a particularly safety-relevant and costly area for older sailing yachts just before sale. 2026 – Underwater Hull Also in June 2026, the underwater hull was prepared anew for the season: • Underwater hull sanded • Cleaned and masked • Two coats of Hempel Hard Racing antifouling The underwater hull is now up to date on maintenance. ________________________________________ 2025 – Sails, Rudder, Underwater Hull, and Propulsion In 2025, further significant investments were made into the vessel. New Sail A new jib was custom-made by the sailmaker pro Luv based on a pattern. At the same time, existing sails and the boom cover were inspected and repaired as needed. New Lazy-Jack/Maindrop System In summer 2025, the yacht received: • New maindrop bag tailored to size • Continuous straps for lazy jacks • New lazy jacks • Professional installation This significantly improved the handling of the mainsail. Rudder and Underwater Hull The rudder blade was: • Sanded • Primed • Painted The underwater hull was also sanded in 2025, cleaned, and treated with two coats of Hard Racing antifouling. Shaft System The grease fitting of the stuffing box in the shaft system was disassembled, repaired, and reassembled. Additional Work in 2025 • Extensive woodwork on deck and in the cockpit • Wood surfaces treated with two coats of teak oil • Mainsheet foot eye relocated • New mounting block fabricated • New Dometic 972 toilet installed • Decommissioning of existing marine toilet valves adjusted for portable toilet use • Maintenance of three life jackets ________________________________________ 2024 – Anchor System, Running Rigging, and Navigation New Electric Anchor Winch The old corroded anchor winch was completely disassembled and replaced with an ITALWINCH Smart R1. This involved not just installing a new winch but also structural repairs: • Old mounting holes sealed with fiberglass-reinforced epoxy resin • Area sanded, filled, and painted • Aluminum checker plate fabricated as chain protection • New anchor winch mounted • Electrical connection renewed • Additional main battery switch installed • New fuses added Running Rigging Various halyards were replaced and additional new lines acquired. Mast and Navigation In spring 2024, among other things: • New anchor light with wiring installed • New holder for wind sensor • Set up chart plotter and wind sensor • New connector for mast wiring • Navionics chart "Scandinavian South / Germany North" included • Radar reflector installed • Mast stepped and sails attached ________________________________________ 2023 – Extensive Basic Refit In 2023, significant foundational work was completed on the Victorian 27. New Navigation Electronics and Onboard Electrical System Installed were: • B&G Vulcan 9R chart plotter/multifunction display • B&G WS320 wireless wind sensor • HST WSLB depth sounder transducer • New FI/LS shore power unit • Battery automatic charger 12 V /15 A with two outputs Additionally: • Navigation electronics fully installed • Existing switch panel refurbished • Electrical connections and wiring revised • New switch panel for shore connection, switch panel, and radio fabricated • Shore connection reinstalled and rewired • Battery charger connected Fuel System and Diesel The fuel system was extensively renewed: • New 21-liter stainless steel diesel tank installed • New filling neck added • New filling line installed • New fuel lines to engine fitted • New tank sender added • New tank gauge included The existing diesel engine was inspected by a professional service after an extended period of inactivity, serviced accordingly, and subsequently put back into operation. Deck Completely Refurbished A particularly extensive part of the refit involved the deck: • Deck fittings disassembled • Deck sanded down and prepared • Deck treated with...

Specifications Equipment

Materiale / unit

Hull type

Fibreglass

Length

8.36

Beam

2.61

Deplacement

2300

Motor & technic

Engine

Vetus

Total power

11

Engine count

1

Engine place

Inboard

Fuel

Diesel